Basic Info.
Model NO.
WRA-5320A+W6BV2.
Connection Form
Thread
Driving Mode
Electric
Nominal Pressure
PN1.0-32.0MPa
Channel
Straight Through Type
Structure
Fixed Ball Valve
Type
Fixed Ball Valve
Function
Relief Valve
Temperature
Normal Temperature
Standard
ISO9001
Application
Industrial Usage, Water Industrial Usage, Household Usage
Medium
Cold/Hot Water, with 50% Glycol
Temperature of Medium
2ºC...95ºC
Rated Pressure
Pn16
Transport Package
Carton with Pallet
Specification
DN15, DN20, DN25
Trademark
Winvall
Origin
China
Product Description
Description
Winner mini motorized ball valve consists of on/off type actuator and W6BV...series ball valve, which have compact structure, stable operation, excellent capacity of water stoppage, large water flow rate, zero dirt block and low torque.
Application
Winner mini motorized ball valves are widely used in HVAC system, heating system, water treatment system and some industrial equipments.
Technical data:
Valve body
Medium: cold/hot water, with 50% glycol Temperature of medium: 2...95 Centigrade
Rated pressure: PN16 Pipe connector: internal thread
Ambient temp. range: -5...+60 Centigrade ;0...90%RH
Valve type: 2-way only
Material
Valve body: Hpb59-1 Seal: ball: EPDM+PTFE
Ball: PTFE+EPDM with O-ring Stem: EPDM O-rings
| Model No. | Valve Type | Inch | Kvs(m3/h) | Pvmax(KPa) | Ps(KPa) |
| W6BV215 | 2 way | 1/2 | 6.3 | 1000 | 1400 |
| W6BV220 | 3/4 | 8.16 | 1000 | 1400 | |
| W6BV225 | 1 | 16 | 1000 | 1400 |
Actuator
WRA-5320A AC230, 50/60Hz ON/OFF
Output torque: 2.5N.m Angle of rotation: 90°
Protect rank: IP54 On/off time: 19S/50Hz; 15S/50Hz
Black wire is the control wire. Power on: valve open, power off: valve close
Blue wire is connected to the com.
Brown wire is connected to the power wire.
Only can be used as on/off type.
| Model No. | Working Voltage | Actuator type | Output torque | Consumption | On/off time | Valve body |
| WRA-5320A | 230VAC±15% 50/60Hz | On/off | 2.5N.m | 6W | 50Hz:19S 60Hz:15S | W6BV215 W6BV220 W6BV225 W6BV232 W6BV240 |
Installation
Insert the valve stem to the bottom of the actuator, and insert 2 pin, located in the bottom of the actuator to the valve's mounting hole. Then screw down the brass cap nut
